-40%
High Power 2200mW Deep UV 270NM SMD LED 5x5 Array with Low Lens and Heat Sink

High Power 2200mW Deep UV 270NM SMD LED 5x5 Array with Low Lens and Heat Sink

$ 712.8

Availability: 100 in stock
  • Brand: Unbranded
  • Return shipping will be paid by: Seller
  • Power Dissipation: 270 mW
  • Condition: New
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Wavelength: 270 nm
  • Type: High-Power LED
  • Restocking Fee: No

    Description

    Feature:
    Eliminates reflow soldering
    Plug-n-play with AWG 23 or 24 wire
    Optional heat sink attachment and power connection
    Optional quartz protector
    Specification:
    Size:                                                   92.1 x 92.1 mm
    Driving current:                                   1.75A
    Peak wavelength:                               270 +/-15nm
    Radiant Flux:                                      2200 mW (+/-10%)
    Forward voltage (LED & driver):        33V (+/-7V)
    Spectrum Half Width:                        11nm
    View Angle:                                        150° (low lens) / 35° (tall lens)
    Note:
    1.
    Forced liquid cooling is required when input wattage is at 100W or higher
    2.
    >100 Watt-rated heat-pipe units typically found for CPU/GPU cooling is recommended
    3.
    High quality thermal grease should be used when mounting the PCB to heat sink
    4.
    Regulated 36-40V, 3A DC power is recommended
    5.   Volume discount available
    6.
    Delivery time can be sooner depending on volume
    Warning:
    UVC LEDs emit deep ultraviolet radiation, with extremely high intensity near its surface. This allows rapid disinfection but safety precautions must be observed during assembly and testing.
    By purchasing the UVC chips (bare dice) or packaged LEDs from the manufacturer, the customer hereby agrees to absolve the manufacturer and seller's responsibility of any bodily harm as a result of failure to observe the precautions, warnings and guidelines.
    All assembly workers, operators and bystanders must wear eye and skin protection when the UVC LEDs are energized.  Bare-eye observation (including through microscopes) and bare-hand handling of a UVC LED in operation is PROHIBITED.
    UVC light can be easily absorbed, so any oil or other absorbent liquid or solid substance must NOT be allowed to touch the sapphire side of the UVC chip, or the dome lens on a packaged LED.
    Do not apply pressure to the dome lens on packaged LED.