4 16 40 64 Bit WS2812 Matrix LED 5050 RGB Full-Color Driver Board For Arduino

Description

Product Overview
4 16 40 64 Bit WS2812 Matrix LED 5050 RGB Full-Color Driver Board For Arduino
4-Bit WS2812B 2*2 Full Color 5050 RGB LED Lamp Panel Light For Arduino
Features:
100% Brand new and high quality!!
The control circuit and the LED share the only power source. Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.
Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
Built-in electric reset circuit and power lost reset circuit.
Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s.
Cascading port transmission signal by single line.
Any two point the distance more than 5m transmission signal without any increase circuit.
When the refresh rate is 30fps, cascade number are not less than1024 points.
Send data at speeds of 800Kbps.
The color of the light were highly consistent, cost-effective..
Applications:
Full-color module, Full color soft lights a lamp strip.
LED decorative lighting, Indoor/outdoor LED video irregular screen.
Specifications:
Color: black
Size: 1.8cm*1.5cm
Package Included:
1 x 5050 RGB LED Lamp Panel
40-Bit 8x5 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board For Arduino
Main features
1. Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC.
2. IC control circuit and a power LED spot light utility.
3. Control circuit chip with RGB components in a package in 5050,
to form a complete external control pixels.
4. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform
shaping and then output to ensure line waveform distortion will not accumulate.
5. Built-in power-on reset and brown-out reset circuit.
6. trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all
true color display, the scanning frequency is not less than 400Hz / s.
7. serial cascade interface, through a signal line to complete the receiving and decoding of data.
8. transfer transmission distance between any two points in less than 5 meters without any
additional circuitry.
9. When the refresh rate of 30 frames / sec, cascading number of not less than 1024 points.
10. data transmission speeds of up to 800Kbps.
11. The color of the light highly consistent, cost-effective.
Package Included:
1 x 8x5 40 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino
64-Bit WS2812 8x8 LED Matrix LED 5050 RGB Full-Color Driver Black Board for Arduino
Main features:
1. Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC.
2. IC control circuit and a power LED spot light utility.
3. Control circuit chip with RGB components in a package in 5050,
to form a complete external control pixels.
4. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform
shaping and then output to ensure line waveform distortion will not accumulate.
5. Built-in power-on reset and brown-out reset circuit.
6. trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all
true color display, the scanning frequency is not less than 400Hz / s.
7. serial cascade interface, through a signal line to complete the receiving and decoding of data.
8. transfer transmission distance between any two points in less than 5 meters without any
additional circuitry.
9. When the refresh rate of 30 frames / sec, cascading number of not less than 1024 points.
10. data transmission speeds of up to 800Kbps.
11. The color of the light highly consistent, cost-effective.
Package Included:
1PCS 8x8 64 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino
16-Bit RGB LED 4 x 4 WS2812 5050 RGB LED + Integrated Drivers For Arduino
Features:
● Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC.
● IC control circuit and a power LED spot light utility.
● Control circuit chip with RGB components in a package in 5050, to form a complete external control pixels.
● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
● Built-in power-on reset and brown-out reset circuit.
● trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all true color display, the scanning frequency is not less than 400Hz / s.
● serial cascade interface, through a signal line to complete the receiving and decoding of data.
● transfer transmission distance between any two points in less than 5 meters without any additional circuitry.
● When the refresh rate of 30 frames / sec, cascading number of not less than 1024 points.
● data transmission speeds of up to 800Kbps.
● The color of the light highly consistent, cost-effective.
Package Included:
1 x RGB LED 4x4 16Bit WS2812B 5050 RGB LED + Integrated Drivers For Arduino
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 25 days,please keep in touch with us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
Item Location
ShenZhen
Payment Mathord
1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment
Returns Policy
1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond
About Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!