10pcs Bargraph Light Led Display Module 10 Segment Ultra Bright DIY Electronic

Description

10pcs Bargraph Light Led Display Module 10 Segment Ultra Bright DIY Electronic
Product Parameters:
Number Of Characters: 10 Segments
Luminous Color: Three Colors (Green/red/blue)
8 Character Height
Dimensions: 25.0mm×10.0mm×8.0mm
Common Pins: Total Number Of Pins: 20 Pins
Surface Color: Black Panel
Colloid Color: Milky White
Features:
Can Drive Light-emitting Under Low Voltage And Low Current Conditions
Very Short Light-emitting Response Time (<0.1μs), Good High-frequency Characteristics, Good Monochromaticity, And High Brightness
Small Size, Light Weight, Good Impact Resistance. Solid-state Package, The Packaging Method Is Glue-filling, With High Stability
Long Service Life, The Service Life Is More Than 50,000 Hours
Can Continuously Scan And Drive Each Byte
Good Display Effect, Wide Viewing Angle
It Is Recommended To Use Constant Current, And Constant Voltage Will Cause Uneven Brightness
Products With Protective Film On The Surface Can Be Torn Off Before Use
soldering Temperature: 260℃ Dwell Time Up To 5 Seconds
When The Operating Temperature Is Higher Than 25°c, Ifm, Ifp And Id Must Be Reduced; The Current Reduction Rate Is -036ma/°c (Dc Drive), Or The Power Consumption Rate Of -0.86ma/°c (Pulse Drive) Is -0.75mw/°c . The Working Current Of The Product Cannot Be Greater Than 60% Of The Corresponding Working Temperature Conditions Ifm Or Ifp.